Hose
-
High Pressure Steel Wire Braided Rubber Hose
CONSTRUCTION：This hose is composed of an inner tube of oil synthetic rubber，a single wire braided reinforcement, and an oil and weather resistant synthetic rubber cover.
APPLICATIONS：It is suitable to carry hydraulic fluids, such as hydraulic oil, fuel oil, lubricants, emulsion, glycol and water, etc.
WORKING TEMPERATURE：from-40℃ up to+100℃
-
Single Wire Braid, Textile Covered Hydraulic Hose
CONSTRUCTION：This hose is composed of an inner tube of oil resistant synthetic rubber, a single wire braid reinforcement and a fiber braided cover.
APPLICATIONS：This hose is suitable for petroleum based hydraulic fluids within a
temperature range of -40℃～ +100℃ . -
Multispiral Hydraulic Hose
CONSTRUCTION：This hose is composed of an inner tube of oil resistant synthetic rubber, four spiral plies of steel wire wrapped in alternating directions, and an oil and weather resistant synthetic rubber cover.
APPLICATIONS： This hose is suitable for petroleum based hydraulic fluids within a temperature range of -40℃～ +120℃ -
Thermoplastic Hydraulic Hose
CONSTRUCTION：This hose is composed of an oil and water resistant synthetic rubber lining, one suitable textile yarn and an oil and weather resistant
APPLICATIONS：This hose is suitable for petroleum based hydraulic fluids within a temperature range of -40℃～ +93℃ . -
High Pressure Thermoplastic Hydraulic Hose
CONSTRUCTION：This hose is composed of an oil and water resistant synthetic rubber lining, two suitable textile yarns and an oil and weather resistant synthetic rubber cover.
APPLICATIONS： This hose is suitable for petroleum based hydraulic fluids within a temperature range of -40℃～ +93℃ . -
Water Suction and Delivery Hose
APPLICATION: Corrugated hose is used for water suction and discharge service, where a rugged yet exible hose is required by industry, building and agriculture, for overhead irrigation systems or for tank truck use.
TEMPERATURE RANGE: -30℃ to + 70℃
CONSTRUCTION: Tube: black, smooth, SBR rubber compound resistant to mud, sewage and waste water.
Reinforcement: high strengty synthetic cord plus helix wire.
Cover: black (wrapped nish) corrugated EPDM rubber compound weathering, ozone and ageing resistant. -
Dock Oil Hose
APPLICATION: Hardwall hose is used for suction and discharge of petroleum products from tankers and barges, bunkering service and industrial applications; suitable for aromatic content up to 50%.
Available with swaged -on (Transoil) ① or built-in (Transoil/RV) nipples with anges ②
APPLICABLE STANDARDS: BS 1435: 87 type S 15，UNI EN 1765: 99 type S 15 TEMPERATURE RANGE: -20℃ (-4°F) to + 82℃ (+185°F)
CONSTRUCTION: Tube: black, smooth, synthetic rubber compound; suitable for aromatic content up to 50%.
Reinforcement: high strength synthetic cord plus embedded steel helix wire and anti-static copper wires.
Cover: black, smooth (wrapped nish), synthetic rubber compound for a superior resistance to weathering, abrasion, oil and sea water. -
Textile Reinforced Hydraulic Rubber Hose
APPLICATIONS：
This hose is suitable for petroleum based hydraulic fluids within a temperature range of -40℃～ +93℃ .
APPLICATIONS：
synthetic rubber cover.
Hydraulic fluids in accordance with ISO6743-4 with the exception of HRD R、HFD S and HFD T at temperatures range of -40℃～ +100℃ . -
Double Fiber Braid (non-metallic), Rubber Covered Hydraulic Hose
CONSTRUCTION：This hose is composed of an inner tube of oil resistant synthetic rubber, a single wire braid reinforcement and a fiber braided cover.
APPLICATIONS： This hose is suitable for petroleum based hydraulic fluids within a temperature range of -40℃～ +100℃ .
-
Steel Wire Spiraled Drilling Rubber Hose
CONSTRUCTION：It is composed of an inner rubber protection layer, middle rubber layer, steel wire spiraled layer and external rubber cover.
APPLICATIONS：Steel wire spiraled drilling rubber hoses are used in oil fields, well
cementing, well repairing, geological explorations, small drilling machine, and water conveyance at coal excavations, used to carry slurry, water at environmental temperature, and other uids. -
Resin Hose Series
PA,PA-11,PA-12 nylon hose is abrasion-resisting and flexible, many materials which make other hose out of work have no effect on the product.
PA, PA-11, PA-12 nylon hose has smooth intine, with fluent liquid flow and without stain and fouling. -
-
Special Rubber Hose Assembly of Coal Hydraulic Stand
Type K1 Joint Applied to hydraulic support equipment.
Technical Standard: Ministry of Coal Industry MT98-84
Type K2 Joint
Applied to the general mining equipment of Britain, France and other European countries. -
Boring Self-styled Sealing-JZF Ⅱ
Application:
It is used in coal or rock in grouting, water injection and subsequent blocking.
Construction:
The sealing is consisted by expansion high-pressure hose, safety valve, quick joints, steel pipe skeleton and so on. -
Oxygen Blowing Hose
APPLICATIONS：
Used to carry oxygen for steel-making equipment.
FEATURE：
1.The rubber has good property of anti-oxygen and hot-resistance.
2.Bearing high pressure, only small distortion of hose body under pressure.
3.Perfect in anti-stretching, bending resistance and fatigue resistance.
4.Metal tting have good seal.
-
Anti aming Fire-resistance Rubber Hose
CONSTRUCTION：
High pressure steel wire spiraled rubber hose, covered with re resistant paint coat, steel wire braided layer, and antiamig layer.
APPLICATIONS：
It is mainly used in high temperature surroundings and in conditions having heat source or heat radiation source, such as oil eld well-control, metal smelts, and chemical industry. -
Marine High Pressure Oil-conveying Rubber Hose
CONSTRUCTION：Steel wire spiraled reinforced layer, wearing resistant synthetic rubber cover.
APPLICATIONS： For carrying natural gas, petroleum, etc. on sea oor.
-
-
-
Quick Coupling Assembly of Rubber Hos
Figure 402
black nuts and connecting parts are used.
Only the 2″type is available-with nitrile-butadiene rubber seal ring.
Figure 602
With resilient nitrile-butadiene rubber seal ring, this gure is used for sealing and protecting the steel-to-steel match.
It is recommended for the connection of manifold and pipe and truck-mounted application and mud delivery. It may be used as pressureless seal union with butt weld Sch.80.
Figure 1502
It is equipped with replaceable flexible NBR seal ring, and sturdy wall thickness is designed for high-pressure system.
It is recommended for cementing, fracturing, acidizing, testing, and blocking well pipeline, can also be used for non- pressure sealed connection. It may be used as pressure seal union with butt weld Sch. XXH.